Helifix Kit

By | April 18, 2022

Helifix Kit. Available to download at www.helifix.com.au. Clean out slots and flush with clean water and thoroughly soak the substrate within the slot.

Helifix Crack Repair Stitching Products to Stabilise
Helifix Crack Repair Stitching Products to Stabilise from www.helifix.com

Load tie into dryfix power driver attachment fitted to sds hammer drill. Drive the bowtie (off hammer) into the joist to the required depth (3″ minimum). Using the helifix pointing gun, inject a bead of helibond along the back of the slot.

Contains All The Necessary Components For Effective And Reliable Stitching Of Cracked Masonry.

Drive the bowtie (off hammer) into the joist to the required depth (3″ minimum). 1 x mortar gun and barrel. Bonds helibar stainless bars into appropriate bed joints or cut slots, stabilises masonry and redistributes tensile loads to minimise any.

Suitable For Use In Stitching All Types Of Cracked Brick, Block And Masonry.

1 x 10kg permacem anchor grout. Wherever possible, repair and refurbishment is increasingly seen as a more sustainable option than. 98 kurrajong avenue, mount druitt, sydney, nsw 2770, australia tel:1300 66 70 71 • fax:02 9669 1702 email:sales@helifix.com.au www.helifix.com.au.

Kit Includes Mixing Paddle And Stainless Steel Crimped Nozzle.

Using the helibar insertion tool push one helibar into the grout to obtain good coverage. New from structural repair specialists helifix, the concrete crack injection repair kit is a low viscosity, fast curing epoxy sealing system for repairing cracks in concrete. Fit the sleeve over the tie and push it to the back of the hole in the masonry (use the support tool) 7.

Easy To Use, The Kit Contains The Necessary Components, Materials And Instructions For An Efficient And Reliable Crack Repair That Will Cure In Around 12 Hours To Be As.

Helifix crack stitching repairs and stabilises cracked masonry using stainless steel helibars bonded into cut slots with helibond grout for a quick, simple,. For use with helifix ties and fixings, the 3kn load test unit, with collet key, allows easy and accurate. Clean out slots and flush with clean water and thoroughly soak the substrate within the slot.

A 10 Bar Professional Crack Stitching Kit With Everything Needed For Repairing Cracks In Walls.

Drive in tie until outer end is fully recessed below face of masonry. Based on our unique helical design, we have developed a range of high performance stainless steel ties, fixings and masonry repair and reinforcement systems that combine the required strength with flexibility, durability and great holding power in all commonly used building materials. Insert a further bead of helibond over the exposed helibar.

Leave a Reply

Your email address will not be published.